Comcast remote volume setup

Wait for the Voice Remote light to change from red to green. Once your Voice Remote is paired, follow the on-screen instructions to set up power, volume and input control for your TV.

Note: While the TV is on TV Box must be activated first , you can also press and hold the xfinity and Mute buttons on the remote for five seconds until the light at the top changes from red to green, then follow the on-screen instructions to pair the Voice Remote to control your TV. Remove the pull tab on the back of the remote to activate it. Turn on your TV or another device you wish to control. Wait until the power button comes on and then release both buttons.

Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds. You will see a red solid light. Enter the TV code for Samsung : , and keep trying with Samsung 4 digit and 5 digit remote code list below. Remote will not change channels or turn on the TV.

Batteries are low, dead, or inserted incorrectly. Verify the batteries are inserted in the correct direction. If your Xfinity remote volume is not working, verify that your batteries work. If they do, try unpairing and repairing your remote or resetting both the remote and tv box. Temporarily unplug all the TV connection cables and reboot the TV set.

Sometimes, temporarily unplugging the connected cables might help resolve your TV no sound issue. This temporary reset works to clear the short-term memory of the television, and also helps to resolve some other issues. Your email address will not be published. Save my name, email, and website in this browser for the next time I comment. Home DIY Crafts. Following a similar pattern as the Xfinity X1 setup, you will instead press the A and D buttons to initialize programming.

Hold these buttons down for a few seconds. You might have to hold the A and D buttons down for a few seconds, but once it begins to register that it is initializing the setup process, the LED light should turn from red to green. This sliver of light at the top of your remote is what shows up when you press almost any button on your remote. This indicates the programming of the remote and means that it is now time to test that this was done correctly. Just as you would test the connection on your Xfinity X1 remote, you would do the same with the Xfinity XR remote, too.

Test the TV volume and power to ensure that the remote is working. Then, you are well on your way to one fewer remotes sitting around your coffee table. Hopefully, you can follow these simple steps to arrive at a very easy connection between your Xfinity remote and your Soundbar no matter the make and model on either of these.

But, if you are sitting there puzzled about why this is not working for you, then there is at least one more step you can take. What do you do if your Xfinity remote programming fails to connect to the Soundbar? One of the first things to test if you cannot get your Xfinity remote programmed to your Soundbar is to press the code and then hold the Channel Up button for up to 3 minutes until the Soundbar turns on. Then, reinitiate the programming steps.

Be aware that this method can seem like it takes forever as the remote resets to be able to recognize your Soundbar. If you have not noticed that your Soundbar has turned on when pressing the code and holding the Channel Up button for at least 3 minutes uninterrupted, then you might want to try another solution. Hopefully, you will not have any issues in the first place. But, if you do, and you need to test out various solutions, be confident in going forward, as this one day of frustration in programming your Xfinity remote to your Soundbar will mean decreased daily frustration after you have succeeded and can use your Xfinity remote once and for all.

Can a Normal Speaker be used as a Subwoofer? So, can you program any Xfinity remote to a Soundbar? How to Program an Xfinity Remote to a Soundbar Ok, so now that you are aware that yes, you should be able to program just about any Xfinity remote to your Soundbar, we are going to take a look at how to do this with two different models: the Xfinity X1 and the Xfinity XR models.

Programming an Xfinity X1 Remote to Your Soundbar If you are using the Xfinity X1 remote, then you will likely be pleased with how simple it can be to pair this device to your Soundbar.